multi-timer скрипт bash

multi-timer Скрипт bash работает в версиях Ubuntu 14.04, 16.04 и 18.04. Он также работает в Windows 10 с установленным Ubuntu 16.04 Desktop.

Характеристики

• Сохраняет конфигурацию между использованиями.
• До 19 таймеров работают последовательно в наборе.
• Индикатор выполнения для каждого таймера.
• Набор таймеров может быть запущен несколько раз.
• Прогресс бар для набора.
• Прогресс бар для всех комплектов.
• Необязательный запрос на запуск каждого таймера и / или установки.
• Дополнительное всплывающее сообщение, когда каждый таймер и / или набор заканчивается.
• Дополнительный сигнал тревоги, когда каждый таймер и / или набор заканчивается.
• Дополнительный экран блокировки, когда каждый таймер ИЛИ устанавливает ИЛИ все наборы заканчиваются.
• Дополнительный интерфейс к индикатору Sysmonitor, поэтому Systray показывает обратный отсчет.
• Опционально закрывать индикатор выполнения, когда заканчиваются все наборы таймеров.

требуетyadпакет sudo apt install yad

Вкладка "Конфигурация ноутбука"

yad(Y etA notherD ialog) имеет функцию, которая позволяетmulti-timerполя, которые должны быть разделены между двумя отдельными панелями, доступ к которым осуществляется в одном окне через вкладки блокнота.

Вкладка"Конфигурация" позволяет вам:

• определить единицы времени в секундах / минутах
• определить, сколько раз запустить набор таймеров.
• ссылка на звуковой файл, используемый для сигналов таймера
• возможность блокировки экрана в конце каждого таймера, набора или всех наборов
• дополнительные опции, как показано ниже

Вкладка "Таймеры ноутбука"

Вкладка Таймеры позволяет:

• Определите псевдоним для каждого таймера, а не таймера 1, таймера 2 и т. Д.
• Установите количество секунд или минут каждого таймера.

Индикатор прогресса

Какmulti-timerобратный отсчет баров используется для:

• каждыйактивный таймер (таймеры нулевой длительности не показаны)
• каждый набор (если в наборе два или более активных таймера)
• все наборы (если запущено два или более наборов)

Bash Script

Скопируйте и вставьте скрипт bash ниже в имя файла multi-timer, Я предлагаю каталог /home/<your_user_name>/bin/, Затем пометьте скрипт как исполняемый файл, используя:

chmod a+x /home/<your_user_name>/bin/multi-timer

Изменение количества таймеров

В строках № 78, 79 и 80 вы увидите это:

# No. of timers default is 17 for 768 line screen and TMR_DURATION_NDX is 30
TMR_DURATION_NDX=30 # Set to 28 for 800x600 screen, 32 for 1920x1080 screen
MAX_TIMERS=17       # Set to 15 for 800x600 screen, 19 for 1920x1080 screen

Хотя поддерживается 19 таймеров, они могут уместиться только на экране 1920x1080. Около 17 (настройка по умолчанию) поместится на среднем экране 1024x768. Если у вас Super VGA с разрешением 800x600, вы можете получить только от 13 до 15 таймеров.

Вы должны изменить значения в строках 85 и 86 одновременно:

Bash field name    ----------- Values to assign ---------
TMR_DURATION_NDX   23  24  25  26  27  28  29  30  31  32
MAX_TIMERS         10  11  12  13  14  15  16  17  18  19

например, если вы хотите максимум 12 таймеров, установите TMR_DURATION_NDX=25 а также MAX_TIMERS=12,

После изменения индекса и максимума сохраните multi-timer файл. Если вы уже запустили программу после того, как файл конфигурации может быть создан, и его придется удалить. Используйте эту команду, чтобы удалить старый файл конфигурации:

`rm ~/.multi-timer`

Обратите внимание, что ~/ это короткий путь к вашей домашней директории, т.е. /home/your_user_name/,

Код Bash для multi-timer

#!/bin/bash

# NAME: multi-timer
# DESC: Multiple timers countdown with alarm.
#       https://Ask-ubuntu.ru/questions/1039357
#       /a-timer-to-set-up-different-alarms-simultaneosly

# DATE: May 31, 2018. Modified March 23, 2019.

# UPDT: 2018-06-07 Add new index for check box: "automatically close
#           progress bar display when all Sets finish". Remove '~/.multi-timer'
#           to delete configuration file before running update.

#       2018-06-19 Set fWindows flag to TRUE/FALSE instead of true/false.

#       2018-11-04 Early exit call Cleanup ()? For some reason sysmon-indicator
#           still displays: '~/.lock-screen-timer-remaining'???
#           Alarm only sounding for first timer but pop-up appears for all???
#           See changes to /etc/pulse/default.pa below:
#### Automatically suspend sinks/sources that become idle for too long
# Nov 4, 2018 - causes 3 to 5 second delay if last sound was 30 seconds ago.
# So you get sound delayed unpausing video or miss multi-timer alerts. Add #
# load-module module-suspend-on-idle
#           Although this fixes delay when switching between sound sources,
#           still change default alarm to sound file over 5 seconds long.

#       2018-12-05 HDD LED indicator flashing constantly while progress bars
#           are updated / program sleeps. Make LastWakeMicroSeconds dependant
#           on lost time log enabled only.

#       2019-03-23 Change default number of timers from 17 to 10 which suits
#           Windows 10 better and is more realistic number for most users.
#           Change grep arguments for "fWindows10" flag.
#           Put "Linux" or "Windows 10" as title prefix.
#           Set Windows 10 Sound file default to C:\Windows\media\Ring05.wav.
#           Error when notify-send command installed (minimal Windows 10).
#       Override "/mnt/c/Windows..." to "C:\Windows..." when invoked.

# NOTE: Following conventions are used:
#           Functions must be defined above point where they are called.
#           Yad style TRUE/FALSE instead of Bash true/false convention.
#           Variables beginning with- s is string
#                                   - i is integer
#                                   - f is TRUE/FALSE
#                                   - a is array
#                                   - cb is combobox

# Must have the yad package.
command -v yad >/dev/null 2>&1 || { echo >&2 \
        "yad package required but it is not installed.  Aborting."; \
        exit 99; }

# Must have notify-send from libnotify-bin package
command -v notify-send >/dev/null 2>&1 || { echo >&2 \
        "libnotify-bin package required but it is not installed.  Aborting."; \
        exit 99; }

# Running under WSL (Windows Subsystem for Linux)?
if grep -qE "(Microsoft|WSL)" /proc/version &> /dev/null ; then
    fWindows10=TRUE
    DefaultSound="C:\Windows\media\Ring05.wav"
    TitlePrefix="Windows 10"
else
    fWindows10=FALSE
    DefaultSound="/usr/share/sounds/freedesktop/stereo/alarm-clock-elapsed.oga"
    TitlePrefix="Linux"
fi

# On Skylake i7-6700HQ .467 seconds lost over 20 minutes incl writing to file.
if [[ "$1" == "-l" ]] || [[ "$1" == "--log-lost-time" ]] ; then
    fLog=TRUE
else
    fLog=FALSE
fi

KEY="12345"     # Key for tying Notebook pages (tabs) together
OIFS=$IFS;      # Save current IFS (Input File Separator)
IFS="|";        # Yad fields and Bash array indices separated by `|`
aMulti=()       # Main array for storing configuration
# Temporary files for Notebook output
res1=$(mktemp --tmpdir iface1.XXXXXXXX) # Notebook Configuraion Page (Tab 1)
res2=$(mktemp --tmpdir iface2.XXXXXXXX) # Notebook Timers Page (Tab 2)

Cleanup () {
    rm -f "$res1" "$res2"               # Remove temporary files
    IFS=$OIFS;                          # Retore Input File Separator
    if [[ -f ~/.lock-screen-timer-remaining ]]; then
        # Remove Sysmonitor Indicator interface file.
        rm -f ~/.lock-screen-timer-remaining
    fi
}

# Comboboxes, constants and Index offsets
cbTimeUnits="Seconds!Minutes"
cbLockScreen="Never!Each timer end!Each set end!All sets end"

TIME_UNIT_NDX=0
SET_COUNT_NDX=1
PROGRESS_INTERVAL_NDX=2
ALARM_FILENAME_NDX=3
LOCK_SCREEN_NDX=4
PROMPT_BEFORE_TIMER_NDX=5
END_TIMER_MESSAGE_NDX=6
END_TIMER_ALARM_NDX=7
PROMPT_BEFORE_SET_NDX=8
END_SET_MESSAGE_NDX=9
END_SET_ALARM_NDX=10
SYSMONITOR_INDICATOR_NDX=11
CLOSE_PROGRAM_AT_END_NDX=12
TMR_ALIAS_NDX=13
# No. of timers default is 17 for 768 line screen and TMR_DURATION_NDX is 30
TMR_DURATION_NDX=23 # Set to 28 for 800x600 screen, 32 for 1920x1080 screen
MAX_TIMERS=10       # Set to 15 for 800x600 screen, 19 for 1920x1080 screen

ReadConfiguration () {

    if [[ -s ~/.multi-timer ]]; then
        read -ra aMulti < ~/.multi-timer
        for (( i=0; i<MAX_TIMERS; i++ )); do
            aAlias[i]="${aMulti[ i+TMR_ALIAS_NDX ]}"
            aDuration[i]="${aMulti[ i+TMR_DURATION_NDX ]}"
        done
        # Set Combobox default with ^ prefix
        Str="${aMulti[TIME_UNIT_NDX]}"
        cbTimeUnits="${cbTimeUnits/$Str/\^$Str}"
        Str="${aMulti[LOCK_SCREEN_NDX]}"
        cbLockScreen="${cbLockScreen/$Str/\^$Str}"
    else
        # Create new file
        aMulti[TIME_UNIT_NDX]="Seconds"
        aMulti[SET_COUNT_NDX]=1
        aMulti[PROGRESS_INTERVAL_NDX]=1
        aMulti[ALARM_FILENAME_NDX]="$DefaultSound"
        aMulti[LOCK_SCREEN_NDX]="Never"
        aMulti[PROMPT_BEFORE_TIMER_NDX]="FALSE"
        aMulti[END_TIMER_MESSAGE_NDX]="FALSE"
        aMulti[END_TIMER_ALARM_NDX]="TRUE"
        aMulti[PROMPT_BEFORE_SET_NDX]="FALSE"
        aMulti[END_SET_MESSAGE_NDX]="FALSE"
        aMulti[END_SET_ALARM_NDX]="FALSE"
        aMulti[SYSMONITOR_INDICATOR_NDX]="FALSE"
        aMulti[CLOSE_PROGRAM_AT_END_NDX]="FALSE"
        aAlias=("Timer 1" "Timer 2" "Timer 3" "Timer 4" "Timer 5" \
                "Timer 6" "Timer 7" "Timer 8" "Timer 9" "Timer 10" \
                "Timer 11" "Timer 12" "Timer 13" "Timer 14" "Timer 15" \
                "Timer 16" "Timer 17" "Timer 18" "Timer 19")
        aDuration=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
    fi

} # ReadConfiguration

BuildTimerPage () {

    aTimerPage=()
    for ((i=0; i<MAX_TIMERS; i++)); do
        b1=$(( i + 1 ))
        aTimerPage+=("--field=Timer $b1 Alias:")
        aTimerPage+=("${aAlias[i]}")
    done
    for ((i=0; i<MAX_TIMERS; i++)); do
        aTimerPage+=("--field=Duration::NUM")
        aTimerPage+=("${aDuration[i]}")
    done
}

GetParameters () {

    # configuration notebook page
    yad --plug=$KEY --tabnum=1 --form \
    --field="Timer duration units::CB" "$cbTimeUnits" \
    --field="Number of times to run set (all timers)::NUM" \
            "${aMulti[SET_COUNT_NDX]}"!1..99!1!0 \
    --field="Progress Bar update every x seconds::NUM" \
            "${aMulti[PROGRESS_INTERVAL_NDX]}"!1..60!1!0 \
    --field="Alarm sound filename:FL" "${aMulti[ALARM_FILENAME_NDX]}" \
    --field="Lock screen::CB" "$cbLockScreen" \
    --field="Ask to begin each timer:CHK" \
            "${aMulti[PROMPT_BEFORE_TIMER_NDX]}" \
    --field="Pop-up message when each timer ends:CHK" \
            "${aMulti[END_TIMER_MESSAGE_NDX]}" \
    --field="Sound alarm when each timer ends:CHK" \
            "${aMulti[END_TIMER_ALARM_NDX]}" \
    --field="Ask to begin each set (all timers):CHK" \
            "${aMulti[PROMPT_BEFORE_SET_NDX]}" \
    --field="Pop-up message when each set ends:CHK" \
            "${aMulti[END_SET_MESSAGE_NDX]}" \
    --field="Sound alarm when each set ends:CHK" \
            "${aMulti[END_SET_ALARM_NDX]}" \
    --field="Interface to Sysmonitor Indicator:CHK" \
            "${aMulti[SYSMONITOR_INDICATOR_NDX]}" \
    --field="Auto close progress bar display when all sets end:CHK" \
            "${aMulti[CLOSE_PROGRAM_AT_END_NDX]}" > "$res1" &

    # timers notebook page
    BuildTimerPage
    yad --plug=$KEY --tabnum=2 --form --columns=2 \
        "${aTimerPage[@]}" > "$res2" &

    # run main dialog
    #  --image=gnome-calculator
    if yad --notebook --key=$KEY --tab="Configuration" --tab="Timers" \
        --image=/usr/share/icons/gnome/48x48/status/appointment-soon.png \
        --title="$TitlePrefix multi-timer setup" --auto-close \
        --width=400 --image-on-top --text="Multiple Timer settings"
    then

        # When LC_NUMERIC=it_IT-UTF8 30 seconds can be `30,000000` or
        # `30.000000` which breaks bash tests for `-gt 0`.
        # Search and replace ".000000" or ",000000" to null
        sed -i 's/[,.]000000//g' "$res1"
        sed -i 's/[,.]000000//g' "$res2"

        # Save configuration
        truncate -s -1 "$res1" # Remove new line at EOF
        cat "$res1" >  ~/.multi-timer
        truncate -s -2 "$res2" # Remove trailing "|" and new line at EOF
        cat "$res2" >> ~/.multi-timer
        # Get user changes into aAlias & aDuration
        ReadConfiguration
        return 0
    else
        return 1    # Cancel click or Escape press
    fi

}

fNewRun=FALSE
fNewTimer=FALSE
iSetSaveSec=0

InitTimers () {

    if [[ "${aMulti[TIME_UNIT_NDX]}" == "Seconds" ]]; then
        fUnitsInSeconds=TRUE
    else
        fUnitsInSeconds=FALSE
    fi

    iActiveTimersCount=0
    for ((i=0; i<MAX_TIMERS; i++)); do
        if [[ ${aDuration[i]} -gt 0 ]] ; then
            (( iActiveTimersCount++ ))
            iSetSaveSec=$(( iSetSaveSec + ${aDuration[i]} ))
        fi
    done

    # Progress Bars, 1 per timer + optional: set and/or set count
    iAllSetsSaveCount="${aMulti[SET_COUNT_NDX]}"
    iAllSetsRemainingCount=$iAllSetsSaveCount
    fSetProgressBar=FALSE # Summary progress bar when > 1 timer used
    iSetProgressBarNo=0
    fAllSetsProgressBar=FALSE  # Summary progress bar when > 1 run
    iAllSetsProgressBarNo=0
    if [[ $iActiveTimersCount -eq 0 ]]; then
        # If active timers count = 0, error message & clear run count
        yad --title "mutli-timer error" --center --text \
            "At least one non-zero timer required." --image=dialog-error \
            --on-top --borders=20 --button=gtk-close:0
        iAllSetsRemainingCount=0 # Set orderly exit via sibling function(s)
        iProgressBarCount=0
        fAbend=TRUE
    else
        # Active timers count > 0 so calculate times
        fNewTimer=TRUE
        fNewRun=TRUE
        [[ $fUnitsInSeconds == FALSE ]] && \
            iSetSaveSec=$(( iSetSaveSec * 60 ))
        iAllSetsSaveCountSec=$(( iSetSaveSec * iAllSetsRemainingCount ))
        iAllSetsElapsedSec=0
        iProgressBarCount=$iActiveTimersCount
        if [[ $iActiveTimersCount -gt 1 ]]; then
            (( iProgressBarCount++ )) # Extra progress bar for Set
            fSetProgressBar=TRUE
            iSetProgressBarNo=$iProgressBarCount
        fi
        if [[ $iAllSetsRemainingCount -gt 1 ]]; then
            (( iProgressBarCount++ )) # Extra progress bar for Set Count
            fAllSetsProgressBar=TRUE
            iAllSetsProgressBarNo=$iProgressBarCount
        fi
    fi

    # Friendly variable names instead of Array entries
    iProgressSleepSeconds="${aMulti[PROGRESS_INTERVAL_NDX]}"
    sSoundFilename="${aMulti[ALARM_FILENAME_NDX]}"
    if [[ $fWindows10 == TRUE ]] ; then
        mod="${sSoundFilename//\//\\}" # Replace Linux / with Windows \
    mod="${mod#*Windows}"          # Remove "/mnt/whatever/Windows"
        sSoundFilename="C:\\Windows""\\$mod"
    fi

    fPromptBeforeTimer="${aMulti[PROMPT_BEFORE_TIMER_NDX]}"
    fEndTimerMessage="${aMulti[END_TIMER_MESSAGE_NDX]}"
    fEndTimerAlarm="${aMulti[END_TIMER_ALARM_NDX]}"
    fPromptBeforeSetRun="${aMulti[PROMPT_BEFORE_SET_NDX]}"
    fEndSetMessage="${aMulti[END_SET_MESSAGE_NDX]}"
    fEndSetAlarm="${aMulti[END_SET_ALARM_NDX]}"
    fSysmonitorIndicator="${aMulti[SYSMONITOR_INDICATOR_NDX]}"
    fCloseProgramAtEnd="${aMulti[CLOSE_PROGRAM_AT_END_NDX]}"
} # InitTimers

# Optional lost time log file monitors program execution time for progress
# bars
[[ $fLog == TRUE ]] && echo "multi-timer lost time log"  > ~/multi-timer.log

PromptToStart () {

    # $1= Message key text
    # Dialog box to proceed with timer.
    yad --title "mutli-timer notification" --center --on-top \
        --fontname="Serif bold italic 28" \
        --text "Ready to start $1" \
        --image=/usr/share/icons/gnome/48x48/status/appointment-soon.png \
        --borders=20 --button=gtk-execute:0

    # Eliminates time waiting for user input
    [[ $fLog == TRUE ]] && LastWakeMicroSeconds=$(date +%s%N)
}

EndMessageAndAlarm () {

    # $1= fEndTimerMessage, $2= fEndTimerAlarm, $3= Message key text

    # Sound alarm when timer ends
    if [[ "$2" == TRUE ]]; then
        if [[ $fWindows10 == TRUE ]] ; then
            powershell.exe -c "(New-Object Media.SoundPlayer $sSoundFilename).PlaySync();"
        elif [[ ! -f "$sSoundFilename" ]]; then
            notify-send --urgency=critical "multi-timer" \
            --icon=/usr/share/icons/gnome/48x48/status/appointment-soon.png \
            "Sound file not found: $sSoundFilename"
        else
            paplay "$sSoundFilename" ;
        fi
    fi

    # Bubble message when timer ends
    if [[ "$1" == TRUE ]]; then
        notify-send --urgency=critical "multi-timer" \
            --icon=/usr/share/icons/gnome/48x48/status/appointment-soon.png \
            "$3 has ended."
        # Something bold to test. Set $3 has ended. into $phrase
        # /usr/bin/notify-send  --urgency=critical --icon=clock -t 4000 \
        # "<i>Time Now</i>" "<span color='#57dafd' font='26px'><i><b>$phrase</b></i></span>" >/dev/null 2>&1

    fi
}

LockScreenCheck () {

    # $1=Run type being checked:
    # "Each timer end" / "Each set end" / "All sets end"
    [[ "$1" != "${aMulti[$LOCK_SCREEN_NDX]}" ]] && return 0

    # When locking screen override & prompt to start next timer / run
    [[ "$1" == "Each timer end" ]] && fPromptBeforeTimer=TRUE
    [[ "$1" == "Each set end"   ]] && fPromptBeforeSetRun=TRUE

    if [[ $fWindows10 == TRUE ]]; then
        # Call lock screen for Windows 10
        rundll32.exe user32.dll,LockWorkStation
    else
        # Call screen saver lock for Unbuntu versions >= 14.04.
        dbus-send --type=method_call --dest=org.gnome.ScreenSaver /org/gnome/ScreenSaver org.gnome.ScreenSaver.Lock
    fi
}

iCurrTimerNo=0
iCurrTimerNdx=0
TotalLostTime=0

PrepareNewSet () {

    # Was a set just completed?
    if [[ $iAllSetsRemainingCount -ne $iAllSetsSaveCount ]]; then
        # Display mssage and/or sound alarm for set end
        EndMessageAndAlarm $fEndSetMessage $fEndSetAlarm \
                           "$sSetProgressText"
        # Check to lock screen
        LockScreenCheck "Each set end"
    fi

    if [[ $iAllSetsRemainingCount -eq 0 ]]; then
        # We are done. Force exit from all while loops.
        fNewRun=FALSE
        fNewTimer=FALSE
    else
        # Decrement remaining run count and start at first timer.
        (( iAllSetsRemainingCount-- ))
        iSetElapsedSec=0
        fNewTimer=TRUE
        iCurrTimerNo=0
        iCurrTimerNdx=0
        iNextTimerNdx=0
        iCurrSetNo=$(( iAllSetsSaveCount - iAllSetsRemainingCount ))
        sSetProgressText="Set $iCurrSetNo of $iAllSetsSaveCount"
        [[ $fPromptBeforeSetRun == TRUE ]] && \
            PromptToStart "$sSetProgressText"
    fi
}

PrepareNewTimer () {

    iCurrTimerElapsedSec=0
    if [[ $iCurrTimerNo -eq $iActiveTimersCount ]]; then
        # Last timer done. Force exit from inner while loop.
        fNewTimer=FALSE
        return 0
    fi

    for ((i=iNextTimerNdx; i<MAX_TIMERS; i++ )); do
        if [[ ${aDuration[i]} -gt 0 ]]; then
            iCurrTimerNdx=$i
            (( iCurrTimerNo++ ))    # Increment progress bar number
            iNextTimerNdx=$(( iCurrTimerNdx + 1 ))
            iCurrTimerSaveSec=${aDuration[i]}
            [[ $fUnitsInSeconds == FALSE ]] && \
                            iCurrTimerSaveSec=$(( iCurrTimerSaveSec * 60 ))
            iCurrTimerRemainingSec=$iCurrTimerSaveSec
            break
        fi
    done
}

# Next function could be embedded within InitTimers to save space
# and code line count but this provides better readability IMO.
SetupYadProgressBars () {

    aYadProgressBars=("yad" "--multi-progress" "--center")
    aYadProgressBars+=("--title=multi-timer progress")
    [[ $fCloseProgramAtEnd == TRUE ]] && aYadProgressBars+=("--auto-close")
    aYadProgressBars+=("--auto-kill" "--watch-bar$iProgressBarCount")

    for ((i=0; i<MAX_TIMERS; i++)); do
        if [[ ${aDuration[i]} -gt 0 ]] ; then
            b1=$(( i + 1 ))
            aYadProgressBars+=("--bar=Timer $b1 - ${aAlias[i]}:NORM")
        fi
    done

    if [[ $fSetProgressBar == TRUE ]]; then
        aYadProgressBars+=("--bar=Set:NORM")
    fi
    if [[ $fAllSetsProgressBar == TRUE ]]; then
        aYadProgressBars+=("--bar=All Sets:NORM")
    fi
}

DisplayProgressBar () {

    # Parameters
    # $1=Elapsed Time, $2=Total Time, $3=Bar Number, 
    # $4=TRUE/FALSE if eligible to update Sysmonitor Indicator
    # $5=Sysmonitor Indicator text for interface file or null
    # $6=Progress Text Prefix, ie "Set 2 of 4: " or null
    iPercentage=$(( $1 * 100 / $2 ))
    echo "$3:$iPercentage"

    RemainingSec=$(( $2 - $1 ))
    h=$((RemainingSec/3600))
    m=$(((RemainingSec%3600)/60))
    s=$((RemainingSec%60))

    TimeRemaining=""
    [[ $h -gt 0 ]] && TimeRemaining=$TimeRemaining" $h Hours"
    [[ $m -gt 0 ]] && TimeRemaining=$TimeRemaining" $m Minutes"
    [[ $s -gt 0 ]] && TimeRemaining=$TimeRemaining" $s Seconds"
    if [[ $TimeRemaining == "" ]]; then
        echo "$3:#$6Finished."
    else
        echo "$3:#$6$TimeRemaining remaining."
    fi

    if [[ $fSysmonitorIndicator == TRUE ]] && [[ $4 == TRUE ]]; then
        echo "$5: $TimeRemaining" > ~/.lock-screen-timer-remaining
    fi
}

ProcessCurrTimer () {

    sTimerAlias="${aAlias[iCurrTimerNdx]}"

    # Dialog box to proceed with timer.
    [[ $fPromptBeforeTimer == TRUE ]] && PromptToStart "$sTimerAlias"

    iLastSleepSec=0
    [[ $fLog == TRUE ]] && echo Start timer: "${aAlias[iCurrTimerNdx]}" \
        >> ~/multi-timer.log

    while [[ $iCurrTimerElapsedSec -lt $iCurrTimerSaveSec ]]; do

        iCurrTimerElapsedSec=$(( iCurrTimerElapsedSec + iLastSleepSec))
        iSetElapsedSec=$(( iSetElapsedSec + iLastSleepSec))
        iAllSetsElapsedSec=$(( iAllSetsElapsedSec + iLastSleepSec))

        DisplayProgressBar $iCurrTimerElapsedSec $iCurrTimerSaveSec \
            $iCurrTimerNo TRUE "${aAlias[iCurrTimerNdx]}" "" ""
        if [[ $fSetProgressBar == TRUE ]] ; then
            DisplayProgressBar $iSetElapsedSec $iSetSaveSec \
                           $iSetProgressBarNo FALSE "" "$sSetProgressText: "
        fi
        [[ $fAllSetsProgressBar == TRUE ]] && \
            DisplayProgressBar $iAllSetsElapsedSec $iAllSetsSaveCountSec \
                           $iAllSetsProgressBarNo FALSE "" ""

        # We sleep lesser of iProgressSleepSeconds or iCurrTimerRemainingSec
        iCurrTimerRemainingSec=$(( iCurrTimerRemainingSec - iLastSleepSec))
        if [[ $iProgressSleepSeconds -gt $iCurrTimerRemainingSec ]]; then
            iLastSleepSec=$iCurrTimerRemainingSec
        else
            iLastSleepSec=$iProgressSleepSeconds
        fi

        if [[ $fLog == TRUE ]] ; then
            tt=$((($(date +%s%N) - LastWakeMicroSeconds)/1000000))
            echo "Last lost time: $tt milliseconds" >> ~/multi-timer.log
            TotalLostTime=$(( TotalLostTime + tt ))
            echo "Total Lost: $TotalLostTime milliseconds" ~/multi-timer.log
        fi
        sleep $iLastSleepSec
        [[ $fLog == TRUE ]] && LastWakeMicroSeconds=$(date +%s%N)

    done

    # Currently removing Sysmonitor Indicator after current timer. Need to
    # modify to do it based on choice box for "Lock Screen".
    if [[ -f ~/.lock-screen-timer-remaining ]]; then
        # Remove Sysmonitor Indicator interface file.
        rm -f ~/.lock-screen-timer-remaining
    fi

    # Check for and display mssage and/or sound alarm
    EndMessageAndAlarm $fEndTimerMessage $fEndTimerAlarm \
                       "Timer: $sTimerAlias"

    # cbLockScreen="Never!Each timer end!Each set end!All sets end"  
    LockScreenCheck "Each timer end"
}

ZeroIndividualTimerProgressBars () {

    for ((i=1; i<=iActiveTimersCount; i++)); do
        echo "$i:0"
        echo "$i:#"
    done
}

###################################
#            MAINLINE             #
###################################

ReadConfiguration

if GetParameters ; then :
else
    # Escape or Cancel from yad notebook
    Cleanup
    exit 1
fi

InitTimers
if [[ $fAbend == TRUE ]]; then
    Cleanup
    exit 1
fi

SetupYadProgressBars
PrepareNewSet
[[ $fLog == TRUE ]] && LastWakeMicroSeconds=$(date +%s%N)

while [[ $fNewRun == TRUE ]]; do

    PrepareNewTimer
    while [[ $fNewTimer == TRUE ]]; do
        ProcessCurrTimer
        PrepareNewTimer
    done
    PrepareNewSet
    [[ $fNewRun == TRUE ]] && ZeroIndividualTimerProgressBars
    [[ $fLog == TRUE ]] && echo "Set Lost Time: $TotalLostTime milliseconds" \
        >> ~/multi-timer.log  # For some reason value is zero?

done | "${aYadProgressBars[@]}"

LockScreenCheck "All sets end"

# TO-DO why is $TotalLostTime zero below?
[[ $fLog == TRUE ]] && echo "All sets lost time: $TotalLostTime milliseconds" \
    >> ~/multi-timer.log

Cleanup

exit 0

Интерфейс индикатора Sysmonitor

Вы можете обновить системный трей / область индикатора приложения с оставшимся временем вместе с "вращающейся текстовой пиццей", как показано в GIF над списком команд.

Чтобы настроить индикатор Sysmonitor, см. Следующие вопросы: Может ли BASH отображаться в systray в качестве индикатора приложения?